ASTM Switchboard Mats

Rhino Switchboard Mats For The “If” in LifeTM.

Switchboard mats should be used in any area where Health and safety risk assessment shows a possibility of high-voltage shock.

ASTM switchboard mats are specially compounded non-conductive matting designed to provide protective insulation against electric shock.

Helping Good People Do Good Things

It is ideal for use in and around substations, transformers, switches, electrical panels, engine rooms, and generators.

When it comes to lessening the threat of an electrocution hazard, Rhino non-conductive switchboard mats get the job done.

Quality You Can Count On

Tested to ASTM D178/ANSI J6.7. Certification imprinted on the back.

Available with a corrugated or Diamond Surface pattern.

Delivering on-time results and reliability

The brand of choice in the oil industry, mass transit and available at Electrical and Safety Supply Houses worldwide.

Contact us at 713-228-5543 or email info@rhinomats.com

CLASS 1 - 3/16” Thick Switchboard - Corrugated

See Product Specs

• DIELECTRIC TEST VOLTAGE 20,000 VAC
• PROOF TESTED OVER ENTIRE SURFACE AT 10,000 VAC
• RECOMMENDED MAXIMUM USE VOLTAGE 7,500 VAC

Stock #	Size	Weight/Ln.Ft.
SB336	3’ × 75’ × 3/16”	3.9 lbs.

Color: Black. Sold in cut lengths and full rolls.

CLASS 2 - 1/4” Thick Switchboard - Diamond

See Product Specs

• DIELECTRIC TEST VOLTAGE 30,000 VAC
• PROOF TESTED OVER ENTIRE SURFACE AT 20,000 VAC
• RECOMMENDED MAXIMUM USE VOLTAGE 17,000 VAC

Stock #	Size	Weight/Lin.Ft.
SB436D	3’ × 75’ × 1/4”	5.2 lbs.
SB448D	4’ × 75’ × 1/4”	6.8 lbs.

Color: Black. 3’ Diamond also in black/yellow. Sold in cut lengths and full rolls

CLASS 2 - 1/4” Thick Switchboard - Corrugated

See Product Specs

• DIELECTRIC TEST VOLTAGE 30,000 VAC
• PROOF TESTED OVER ENTIRE SURFACE AT 20,000 VAC
• RECOMMENDED MAXIMUM USE VOLTAGE 17,000 VAC

Stock #	Size	Weight/Lin.Ft.
SB424	2’ × 75’ × 1/4”	3.5 lbs.
SB436	3’ × 75’ × 1/4”	5.2 lbs.
SB448	4’ × 75’ × 1/4”	6.8 lbs.

Color: Black. 3’ Diamond also in black/yellow. Sold in cut lengths and full rolls

CLASS 3 - 3/8” Thick Switchboard - Corrugated

See Product Specs

• DIELECTRIC TEST VOLTAGE 40,000 VAC
• PROOF TESTED OVER ENTIRE SURFACE AT 30,000 VAC
• RECOMMENDED MAXIMUM USE VOLTAGE 26,500 VAC

Stock #	Size	Weight/Lin.Ft.
SB536	3’ × 75’ × 3/8”	7.7 lbs.

Color: Black. Sold in cut lengths and full rolls.

CLASS 4 - 1/2” Thick Switchboard - Corrugated

See Product Specs

• DIELECTRIC TEST VOLTAGE 50,000 VAC
• PROOF TESTED OVER ENTIRE SURFACE AT 40,000 VAC
• RECOMMENDED MAXIMUM USE VOLTAGE 36,000 VAC

Stock #	Size	Weight/Lin.Ft.
SB636	3’ × 30’ × 1/2”	10.7 lbs.

Color: Black. Sold in cut lengths and full rolls. Optional Bevel.