Corrugated & Diamond Switchboard Matting - ASTMD-178

Image

A specially compounded non-conductive corrugated or diamond surfaced matting designed to help prevent electrical shock around high voltage electrical equipment, such as fuse boxes and control panels. Rhino Switchboard conforms to OSHA requirements for electrical protective devices and is tested to ASTMD-178 requirements,Back Side of Switchboard Matting 1 with certification engraved on back. Every roll is proof tested at the specified voltage over the entire surface. Dielectric test strength exceeds specification requirements for additional safety margin. Rhino dielectric switchboard matting also meets the optional requirements cited by ASTM for flame resistance, ozone resistance and oil resistance. Certification engraved on back.

Catalog Page 51 - Switchboard Matting

3/16" Thick, Type II, Class 1 Switchboard - CORRUGATED

See Product Specs

Image
  • DIELECTRIC TEST VOLTAGE 20,000 VAC
  • Proof Tested over entire surface at 10,000 VAC
  • Recomended Maximum Use Voltage 7,500 VAC
Stock # Size Weight/Lin.Ft.
SB336 3’ × 75’ 3.9 lbs.
Dielectric Test Voltage: 20.000 VAC
Proof Tested over entire surface at: 10.000 VAC
Recommended Maximum use voltage: 7.500 VAC
Color: Black. (Full rolls only).

1/4" Thick, Type II, Class 2 Switchboard - CORRUGATED

See Product Specs

Image
  • DIELECTRIC TEST VOLTAGE 30,000 VAC
  • Proof Tested over entire surface at 20,000 VAC
  • Recomended Maximum Use Voltage 17,000 VAC
Stock # Size Weight/Lin.Ft.
SB424 2’ × 75’ 3.5 lbs.
SB436 3’ × 75’ 5.2 lbs.
SB448 4’ × 75’ 6.8 lbs.
Dielectric Test Voltage: 30.000 VAC
Proof Tested over entire surface at: 20.000 VAC
Recommended Maximum use voltage: 17.000 VAC
Color: Black only

1/4" Thick, Type II, Class 2 Diamond Pattern

See Product Specs

Image
  • DIELECTRIC TEST VOLTAGE 30,000 VAC
  • Proof Tested over entire surface at 20,000 VAC
  • Recomended Maximum Use Voltage 17,000 VAC
Stock # Size Weight/Lin. Ft.
SBD424 2’ × 75’ 3.5 lbs.
SBD436 3’ × 75’ 5.2 lbs.
SBD448 4’ × 75’ 6.8 lbs.
Dielectric Test Voltage: 30.000 VAC
Proof Tested over entire surface at: 20.000 VAC
Recommended Maximum use voltage: 17.000 VAC
Color: Black (Black/Yellow is 36” only)

3/8" Thick, Type II, Class 3 Switchboard - CORRUGATED

See Product Specs

Image
  • DIELECTRIC TEST VOLTAGE 40,000 VAC
  • Proof Tested over entire surface at 30,000 VAC
  • Recomended Maximum Use Voltage 26,500 VAC
Stock # Size Weight/Lin.Ft.
SB536 3’ × 75’ 7.7 lbs.
Dielectric Test Voltage: 40.000 VAC
Proof Tested over entire surface at: 30.000 VAC
Recommended Maximum use voltage: 26.500 VAC
Color: Black. (Full rolls only).

1/2" Thick, Type II, Class 4 Switchboard - CORRUGATED

See Product Specs

Image
  • DIELECTRIC TEST VOLTAGE 50,000 VAC
  • Proof Tested over entire surface at 40,000 VAC
  • Recomended Maximum Use Voltage 36,000 VAC
Stock # Size Weight/Lin.Ft.
SB636 3’ × 30’ 10.7 lbs.
Dielectric Test Voltage: 50.000 VAC
Proof Tested over entire surface at: 40.000 VAC
Recommended Maximum use voltage: 36.000 VAC
Color: Black. (Full rolls only)

When personnel safety from electrocution hazard is a concern,
specify Rhino Switchboard matting.